The PANASONIC PLC FP-X0 Extension Units AFPX0E24R, AFPX0E24T, and AFPX0E24P are essential building blocks for expanding the I/O capacity of the FP-X0 programmable logic controller series. These units provide 24 mixed input/output points, engineered for high-speed data acquisition and reliable control in manufacturing and process automation. With three distinct output types—relay (R) for general-purpose switching, transistor (T) for high-speed sink outputs, and transistor sink (P) for NPN applications—the series adapts to diverse actuator and sensor requirements. Built to withstand industrial shock, vibration, and electrical noise, these modules are fully compliant with international standards, ensuring long-term performance in factory floors, packaging lines, and material handling systems.
| Parameter |
Specification |
| Model Numbers |
AFPX0E24R (Relay Output), AFPX0E24T (Transistor Sink Output), AFPX0E24P (Transistor Source Output) |
| Number of I/O Points |
24 total (16 inputs / 8 outputs) |
| Input Type |
24 V DC, sink/source (common to all models) |
| Output Type |
Relay (2 A per point, resistive load) for AFPX0E24R; Transistor (0.5 A per point, DC load) for AFPX0E24T; Transistor source (0.5 A per point) for AFPX0E24P |
| Power Supply Voltage |
24 V DC (external, supplied via FP-X0 base unit) |
| CE Marking Compliance |
Low Voltage Directive, EMC Directive, RoHS Directive |
| Operating Temperature |
0 to +55 °C (+32 to +131 °F) |
| Storage Temperature |
−40 to +70 °C (−40 to +158 °F) |
| Operating Humidity |
10 to 95% RH (at +25 °C, no condensation) |
| Storage Humidity |
10 to 95% RH (at +25 °C, no condensation) |
| Withstand Voltage |
2,300 V AC for 1 minute (between input and relay output terminals); 1,500 V AC for 1 minute (between power supply and ground); 500 V AC for 1 minute (between input and transistor output terminals) |
| Insulation Resistance |
100 MΩ min. (at 500 V DC insulation resistance meter) |
| Vibration Resistance |
5 to 8.4 Hz: 3.5 mm amplitude; 8.4 to 150 Hz: fixed acceleration 9.8 m/s²; 1 scan/min in X, Y, Z directions for 10 min each |
| Shock Resistance |
147 m/s², 4 times in each X, Y, Z direction |
| Noise Immunity |
1,500 V [p-p] pulse width 50 ns, 1 μs (noise simulation method, AC power supply terminals) |
| Operating Environment |
No corrosive gases or excessive dust |
| Overvoltage Category |
II (per IEC/EN 60664-1) |
| Pollution Degree |
2 (per IEC/EN 60664-1) |
| Net Weight |
Approx. 280 g (AFPX0E24R/T/P) |
| Dimensions (W x H x D) |
90 mm x 90 mm x 60 mm (typical for 24-point extension) |
- Input Specifications: 16 digital inputs, 24 V DC, 7 mA typical, ON threshold ≥ 19.2 V, OFF threshold ≤ 5 V, response time < 1 ms.
- Output Specifications: 8 outputs per unit; relay type rated for 2 A at 250 V AC / 30 V DC; transistor type rated for 0.5 A at 24 V DC, with short-circuit protection (AFPX0E24T/P).
- Connection Method: Removable screw terminal blocks for inputs and outputs, allowing easy wiring and maintenance without disconnecting cables.
- Diagnostics: LED indicators for power, input status, and output status on the front panel for real-time monitoring.
- Compatibility: Directly mounts to FP-X0 base units (e.g., AFPX0C30R, AFPX0C60R) via internal bus connector; no additional cabling required.
- Environmental Protection: IP20 rated enclosure; suitable for installation in standard control panels with proper ventilation.
What Does Our Clients Say
Mitsubishi MR-J4
Laura Navas
Great product!
2019/12/01
Keyence sensor
EQDR SALES
Original and fast!
2020/02/22