Mitsubishi AJ65SBTB2N-8S CC-Link PLC Module

Series#: Mitsubishi

Product Details

Part Number: AJ65SBTB2N-8S and AJ65SBTB2N-16S – High-reliability AC output modules for Mitsubishi CC-Link systems.
8-point (AJ65SBTB2N-8S) and 16-point (AJ65SBTB2N-16S) AC output configurations, rated for 100–240 VAC loads.
Robust photocoupler isolation ensures safe and noise-immune signal transmission.
Supports high inrush currents up to 25 A for 10 ms, ideal for driving inductive loads like relays and solenoids.
Built-in CR surge absorber for superior protection against voltage transients.
Compact, lightweight design (0.25 kg for 8-point, 0.35 kg for 16-point) for easy DIN-rail mounting.
100% Genuine and New, rigorously inspected before international dispatch.

Specification

The AJ65SBTB2N-8S and AJ65SBTB2N-16S are Mitsubishi CC-Link remote I/O modules engineered for demanding AC output applications. These modules provide reliable switching of 100–240 VAC loads with photocoupler isolation, ensuring galvanic separation between the CC-Link network and field devices. With a maximum load current of 0.6 A per point and robust surge suppression, they are ideally suited for controlling contactors, valves, and lighting systems in industrial automation. The modules occupy a single station with 32-point assignment, simplifying network configuration. Below are the comprehensive technical specifications.

Parameter	AJ65SBTB2N-8S	AJ65SBTB2N-16S
Number of Output Points	8 points	16 points
Insulation Method	Photocoupler	Photocoupler
Rated Load Voltage	100 to 240 V AC 50/60 Hz ±5%	100 to 240 V AC 50/60 Hz ±5%
Max. Load Voltage	264 V AC	264 V AC
Max. Load Current	0.6 A/point, 2.4 A/1 common	0.6 A/point, 4.8 A/1 common
Min. Load Voltage × Current	50 V AC 100 mA, 100 V AC 10 mA, 240 V AC 10 mA	50 V AC 100 mA, 100 V AC 10 mA, 240 V AC 10 mA
Max. Inrush Current	25 A 10 ms or lower	25 A 10 ms or lower
Leakage Current at OFF	1.5 mA rms or lower (100 V AC rms 60 Hz), 3 mA rms or lower (200 V AC rms 60 Hz)	1.5 mA rms or lower (100 V AC rms 60 Hz), 3 mA rms or lower (200 V AC rms 60 Hz)
Max. Voltage Drop at ON	1.5 V rms or lower (at 0.6 A)	1.5 V rms or lower (at 0.6 A)
Surge Suppression	C·R absorber (0.01 μF + 47 Ω)	C·R absorber (0.01 μF + 47 Ω)
Common Method	8 points/1 common (terminal block 2-wire type)	16 points/1 common (terminal block 2-wire type)
Number of Stations Occupied	1 station, 32 points assignment (use 8 points)	1 station, 32 points assignment (use 16 points)
Noise Durability	Simulator noise 1500 Vp-p, noise width 1 ms, carrier frequency 25 to 60 Hz; Fast transient/burst IEC61000-4-4: 1 kV	Simulator noise 1500 Vp-p, noise width 1 ms, carrier frequency 25 to 60 Hz; Fast transient/burst IEC61000-4-4: 1 kV
Withstand Voltage	2830 V AC between all AC external terminals and ground, rms/3 cycles (2000 m above sea level); 500 V AC for 1 minute between all DC external terminals and ground	2830 V AC between all AC external terminals and ground, rms/3 cycles (2000 m above sea level); 500 V AC for 1 minute between all DC external terminals and ground
Insulation Resistance	10 MΩ or higher, measured with 500 V DC insulation tester between all AC/DC external terminals and ground	10 MΩ or higher, measured with 500 V DC insulation tester between all AC/DC external terminals and ground
Weight	0.25 kg (0.55 lb)	0.35 kg (0.77 lb)
External Connection Method	7-point 2-piece terminal block (transmission circuit, module power supply); Direct-type 18-point terminal block (I/O power supply area) (M3 screw)	7-point 2-piece terminal block (transmission circuit, module power supply); Direct-type 34-point terminal block (I/O power supply area) (M3 screw)
Applicable Solderless Terminal	RAV1.25-3.5 (JIS C 2805) [Wire: 0.3–1.25 mm²]; V2-MS3, RAP2-3S, RAP2-3; 2-3N, 2-3S [Wire: 1.25–2 mm²]	RAV1.25-3.5 (JIS C 2805) [Wire: 0.3–1.25 mm²]; V2-MS3, RAP2-3S, RAP2-3; 2-3N, 2-3S [Wire: 1.25–2 mm²]

CC-Link Compatibility: Both modules are fully compliant with the Mitsubishi CC-Link fieldbus standard, enabling seamless integration into existing automation networks.
Output Protection: Integrated C·R surge absorber protects against high-voltage transients, extending relay and load life.
Environmental Robustness: Withstands 2830 V AC dielectric strength and offers 10 MΩ insulation resistance, ensuring reliable operation in harsh industrial environments.
Terminal Flexibility: Dual terminal blocks separate transmission/power circuits from I/O wiring, simplifying installation and troubleshooting.
Compact Footprint: The slim profile (0.25–0.35 kg) allows high-density mounting on DIN rails, saving cabinet space.