Siemens 6ES7131-4EB00-0AB0 Electronic Module

Series#: Siemens

Product Details

6ES7131-4EB00-0AB0 – Siemens SIMATIC DP Electronic Module for ET 200S, 5-channel digital input unit.
Compact 5-channel design for space-saving installation in distributed I/O systems.
Rated for 24V DC supply, with 2-wire and 3-wire sensor connectivity (BERO-compatible).
High channel density with integrated short-circuit and overload protection per channel.
Plug-and-play replacement – No configuration required for module swap in ET 200S stations.
Guaranteed 100% Original factory condition, offering fast and secure worldwide delivery.

Specification

The Siemens SIMATIC DP electronic module, model 6ES7131-4EB00-0AB0, is a high-performance 5-channel digital input module designed specifically for the ET 200S distributed I/O system. This module offers reliable signal acquisition for 24V DC sensors, including 2-wire proximity switches and 3-wire BERO-compatible devices. With its compact footprint and integrated diagnostic capabilities, the 6ES7131-4EB00-0AB0 is ideal for applications requiring dense channel counts in limited cabinet space, such as automotive manufacturing lines, packaging machinery, and material handling systems. Each input channel features electrical isolation from the backplane bus, ensuring robust operation in industrial environments with electrical noise. The module supports a nominal input voltage of 24V DC (20.4 to 28.8V DC) and provides a typical input current of 7 mA per channel at 24V DC. It is designed for direct connection to standard 3-wire sensors (PNP) and 2-wire proximity switches, with a sensor supply voltage derived from the module's backplane bus. The module is fully compatible with SIMATIC S7-300, S7-400, and WinAC controllers via the ET 200S interface, and supports PROFIBUS DP or PROFINET communication depending on the head module used. Its mechanical design allows for tool-free mounting on the ET 200S terminal block, and the module can be hot-swapped without disconnecting field wiring, minimizing downtime during maintenance. For detailed technical data, please refer to the table below.

Parameter	Specification
Product Type	SIMATIC DP Electronic Module for ET 200S
Model Number	6ES7131-4EB00-0AB0
Number of Digital Inputs	5 (1 x 5-channel group)
Input Voltage Type	DC
Rated Input Voltage	24V DC (20.4 to 28.8V DC, including ripple)
Input Current per Channel at 24V DC	7 mA typical
Input Signal Level "0"	-3 to +5V DC
Input Signal Level "1"	+15 to +30V DC
Input Delay (0 to 1)	1.5 ms typical (hardware filter)
Input Delay (1 to 0)	1.5 ms typical (hardware filter)
Sensor Compatibility	2-wire proximity switches (BERO), 3-wire PNP sensors, mechanical contacts
Sensor Supply Voltage	From backplane bus (24V DC, limited by module)
Short-Circuit Protection	Yes, per channel (electronic, auto-reset)
Overload Protection	Yes, per channel (thermal, auto-reset)
Electrical Isolation	Between channels and backplane bus: 500V DC for 1 minute
Backplane Bus Current Consumption	Typical 30 mA, max 40 mA
Power Dissipation	Typically 1.5 W (at 24V DC, all channels ON)
Module Format	ET 200S electronic module (single-width, 15 mm)
Mounting Method	Snap-on onto ET 200S terminal block (type: 6ES7193-4xxxx)
Weight	Approx. 30 g
Ambient Temperature (Operation)	0 to +60 °C
Ambient Temperature (Storage)	-40 to +85 °C
Relative Humidity	5% to 95% (non-condensing)
Protection Class	IP20 (when installed in enclosure)
Certifications	CE, cULus, FM, ATEX (Zone 2) optional
Compatible Systems	SIMATIC S7-300, S7-400, WinAC via ET 200S interface (PROFIBUS DP or PROFINET)
Ordering Information	Module: 6ES7131-4EB00-0AB0; Terminal block: 6ES7193-4xxxx (sold separately)