| Parameter |
Specification |
| B&R ID Code |
0xF9EA |
| Cooling |
Fanless |
| Status Indicators |
CPU function, Ethernet, POWERLINK, CompactFlash, battery |
| Diagnostics |
Battery (LED & software), CPU function (LED), CompactFlash (LED), Ethernet (LED), POWERLINK (LED), Temperature (software register) |
| Support Features |
Controller redundancy: No; Storage health data: Yes; ACOPOS support: Yes; Visual Components support: Yes |
| Power Consumption (without interface module & USB) |
6.9 W |
| Power Consumption (X2X Link power supply) |
1.42 W |
| Power Consumption (Internal I/O) |
0.6 W |
| Additional Power Dissipation (actuators resistive) |
- |
| Certifications |
CE, UKCA, ATEX (Zone 2, II 3G Ex nA nC IIA T5 Gc, IP20, FTZÚ 09 ATEX 0083X), cULus (E115267, Industrial control equipment), HazLoc (cCSAus 244665, Class I, Division 2, Groups ABCD, T5), DNV (Temp B, Humidity B, Vibration B, EMC B), CCS |
| CPU and X2X Link Power Supply |
| Input Voltage |
24 VDC -20% / +25% (nominal 24 VDC, max input power at nominal: 36 W) |
| Input Current |
Max. 1.5 A at 24 VDC |
| Fuse |
Integrated, cannot be replaced |
| Reverse Polarity Protection |
Yes |
| X2X Link Power Supply Output |
| Nominal Output Power |
7 W (derated to 5 W above 55°C) |
| Parallel Connection |
Yes (75% of nominal power expected) |
| Redundant Operation |
Yes |
| Input I/O Power Supply |
| Input Voltage |
24 VDC -15% / +20% (nominal 24 VDC, max input power at nominal: 240 W) |
| Fuse |
Required line fuse: Max. 10 A slow-blow |
| Output I/O Power Supply |
| Nominal Output Voltage |
24 VDC |
| Permissible Contact Load |
10 A |
| Power Supply - General Information |
| Status Indicators |
Overload, operating status, module status, RS232 data transfer |
| Diagnostics |
RS232 data transfer (LED), Module run/error (LED & software), Overload (LED & software) |
| Electrical Isolation |
I/O supply - I/O power supply: No; CPU/X2X Link supply - CPU/X2X Link power supply: Yes |
| Controller |
| CompactFlash Slot |
1 |
| Real-Time Clock |
Nonvolatile, resolution 1 s, -20 to 20 ppm accuracy at 25°C |
| FPU |
Yes |
| Processor Type |
Intel Atom E3915 |
| Clock Frequency |
400 MHz (compatible) |
| L1 Cache |
Data: 24 kB; Program: 32 kB |
| L2 Cache |
1 MB |
| Integrated I/O Processor |
Processes I/O data points in the background |
| Modular Interface Slots |
1 |
| Remanent Variables |
Max. 512 kB (configurable in Automation Studio) |
| Shortest Task Class Cycle Time |
400 µs |
| Typical Instruction Cycle Time |
0.0044 µs |
| Data Buffering |
Battery monitoring: Yes; Lithium battery: 4 years during operation, min. 2 years at 23°C (PLC off) |
| Standard Memory |
RAM: 512 MB LPDDR4 SDRAM; User RAM: 1 MB SRAM (minus remanent variables) |
| Application Memory |
Type: 1 GB eMMC flash memory; Data retention: 10 years; Writable data: Guaranteed 40 TB, 21.9 GB/day for 5 years; Guaranteed erase/write cycles: 20,000; Error-correcting code (ECC): Yes |
| Interfaces |
| Interface IF1 |
Signal: RS232; Variant: Connection via 12-pin terminal block X20TB12; Max. distance: 900 m; Transfer rate: Max. 115.2 kbit/s |
| Interface IF2 |
Signal: Ethernet; Variant: 1x RJ45 shielded; Line length: Max. 100 m between 2 stations; Transfer rate: 10/100/1000 Mbit/s; Transfer: Physical layer 10BASE-T/100BASE-TX/1000BASE-T, Half-duplex Yes, Full-duplex Yes, Autonegotiation Yes, Auto-MDI/MDIX Yes |
| Interface IF3 |
Fieldbus: POWERLINK (V2) managing or controlled node; Type: Type 4 |
What Does Our Clients Say
Mitsubishi MR-J4
Laura Navas
Great product!
2019/12/01
Keyence sensor
EQDR SALES
Original and fast!
2020/02/22