Mitsubishi MR-J3-100B Servo Drive

Series#: Mitsubishi

Product Details

Model: MITSUBISHI SERVO DRIVE MR-J3-100B (1kW rated output) – a high-performance AC servo amplifier for precision motion control.
Advanced sine-wave PWM control with current control system for smooth, low-torque ripple operation.
Supports position, speed, and torque control modes with high-resolution 262,144 p/rev encoder feedback.
Built-in dynamic brake and comprehensive safety features: overcurrent, overvoltage, overload, and encoder fault protection.
Wide power supply compatibility: 3-phase 200–230VAC or 1-phase 200–230VAC (50/60Hz) with ±5% frequency tolerance.
Compact, fan-cooled open structure (IP00) with ambient temperature range 0–55°C and 90% RH maximum humidity.
100% Genuine and New, rigorously inspected before international dispatch.

Specification

The Mitsubishi Servo Drive MR-J3-100B is a 1kW AC servo amplifier engineered for demanding industrial automation applications requiring precise speed, torque, and position control. This model supports both 3-phase and 1-phase 200–230VAC input, making it versatile for various installation environments. With a built-in regenerative resistor, high-speed pulse input up to 1Mpps (differential), and electronic gear capability, the MR-J3-100B delivers exceptional performance for CNC machines, robotics, packaging lines, and other motion control systems. Its advanced safety protections and robust construction ensure reliable operation in harsh factory conditions.

Parameter	Specification for MR-J3-100B
Rated Output	1 kW (1.34 HP)
Main Circuit Power Supply	3-phase 200–230VAC 50/60Hz or 1-phase 200–230VAC 50/60Hz
Control Circuit Power Supply	24VDC ±10% (300mA required)
Permissible Voltage Fluctuation	3-phase: 170–253VAC; 1-phase: 170–253VAC
Permissible Frequency Fluctuation	±5% maximum
Power Consumption	45 W
Built-in Regenerative Resistor	100 W
External Regenerative Resistor (Option)	Not applicable (built-in sufficient)
Control System	Sine-wave PWM control / current control system
Dynamic Brake	Built-in
Safety Features	Overcurrent, overvoltage, overload (electronic thermal), motor overheat, encoder fault, regeneration fault, undervoltage, overspeed, excess error
Maximum Input Pulse Frequency	1 Mpps (differential receiver), 200 kpps (open collector), optional 4 Mpps
Positioning Feedback Pulse	262,144 p/rev (encoder resolution)
Command Pulse Multiple (Electronic Gear)	A: 1–1,048,576; B: 1–1,048,576; Ratio: 1/10 < A/B < 2000
Positioning Complete Width	0 to ±10,000 pulses (command pulse unit)
Excess Error	±3 rotations
Torque Limit	Set by parameters or external analog input (0 to +10VDC)
Speed Control Range	Analog: 1:2000; Internal: 1:5000
Analog Speed Command Input	0 to ±10VDC / rated speed
Speed Fluctuation Rate	±0.01% max (load 0–100%); 0% (power ±10%); ±0.2% max (ambient 25°C±10°C)
Analog Torque Command Input	0 to ±8VDC / maximum torque (input impedance 10–12kΩ)
Speed Limit (Torque Mode)	Set by parameters or external analog input (0 to ±10VDC)
Structure	Fan-cooled open (IP00)
Ambient Temperature	0–55°C (operation); -20–65°C (storage)
Ambient Humidity	90% RH max (non-condensing)
Atmosphere	Indoors, no corrosive/inflammable gas, oil mist, or dust
Elevation	1000 m or less above sea level
Vibration	5.9 m/s² max
Weight	Approx. 2.1 kg (4.6 lb)