Delta ASDA-B3 Servo Drive

Series#: Delta

Product Details

Delta ASDA-B3 Servo Drive 100W to 3kW – High-performance motion control solution for precision automation.
24-bit high-resolution encoder support (16,777,216 pls/rev) for ultra-smooth, accurate positioning.
Wide power range from 100W to 3kW, covering single-phase and three-phase 220VAC input options.
Advanced SVPWM control with auto/manual tuning and built-in regenerative resistor (750W and above).
Multiple communication interfaces: USB, RS-485, CANopen, DMCNET, and EtherCAT for flexible integration.
Comprehensive protection functions including overcurrent, overvoltage, overload, and short-circuit protection.
100% Genuine and New, rigorously inspected before international dispatch.

Specification

The Delta ASDA-B3 Servo Drive 100W to 3kW represents a state-of-the-art servo drive series designed for demanding industrial automation applications. Engineered for precision and reliability, this drive family delivers exceptional performance across a broad power spectrum, from 100W to 3kW. Whether you need a compact 100W unit for small pick-and-place machines or a robust 3kW drive for high-torque CNC axes, the ASDA-B3 series offers consistent, high-speed control with 24-bit encoder resolution. Its versatile input voltage support (single-phase or three-phase 220VAC) and multiple communication protocols ensure seamless integration into existing systems, while advanced tuning filters and protection mechanisms guarantee long-term stability. Below is the detailed specification table for the entire ASDA-B3 power range.

Specification	100W	200W	400W	750W	1kW	1.5kW	2kW	3kW
Rated Power	100W	200W	400W	750W	1kW	1.5kW	2kW	3kW
Drive Model Number (ASD-B3-xxxx)	1	2	4	7	10	15	20	30
Phase / Voltage	Single-phase / Three-phase 220VAC	Three-phase 220VAC
Permissible Voltage	Single-phase / Three-phase 200 – 230VAC, -15% to 10%	Three-phase 200 – 230VAC, -15% to 10%
Input Current (3PH) (Arms)	0.81	1.61	4.32	8.76	9.21	9.72	14.7	16.68
Input Current (1PH) (Arms)	1.39	2.77	8.28	16.68	17.49	18.72	N/A	N/A
Continuous Output Current (Arms)	0.9	1.55	2.65	5.1	7.3	8.3	13.4	19.4
Max. Instantaneous Output Current (Arms)	3.88	7.07	10.6	16.4	21.21	27	38.3	58.9
Cooling Method	Natural cooling	Fan cooling
Drive Resolution	24-bit (16,777,216 pls/rev)
Main Circuit Control	SVPWM control
Tuning Mode	Auto / Manual
Regenerative Resistor	N/A	Built-in
Pulse Type (Pulse Control Mode)	Pulse + Direction; A phase + B phase; CCW pulse + CW pulse
Max. Output Pulse Frequency (Pulse Control Mode)	Pulse + direction: 4 Mpps; CCW pulse + CW pulse: 4 Mpps; A phase + B phase: single-phase 4 Mpps; Open collector: 200 Kpps
Command Source	External pulse (pulse control mode) / Internal register (PR mode)
Smoothing Method	Low-pass, S-curve, and moving filters
E-Gear Ratio	N/M times, limited to (1/4 < N/M < 262144) N: 1 – 536870911 / M: 1 – 2147483647
Torque Limit	Parameter settings
Feed Forward Compensation	Parameter settings
Analog Monitor Output	Monitoring signal set with parameters (voltage output range: ±8V); resolution: 10-bit
Protection Function	Overcurrent, Overvoltage, Undervoltage, Overheat, Regeneration error, Overload, Excessive speed deviation, Excessive position deviation, Encoder error, Adjustment error, Emergency stop, Forward/reverse limit error, Serial communication error, RST leak phase, Serial communication timeout, Short-circuit protection for terminals U, V, W
Communication Interface	USB / RS-485 / CANopen / DMCNET / EtherCAT
Installation Site	Indoors (avoid direct sunlight), no corrosive vapor (avoid fumes, flammable gases, and dust)
Altitude	2000 m or lower above sea level
Atmospheric Pressure	86 kPa – 106 kPa
Operating Temperature	0°C to 55°C (if above 45°C, forced cooling required)
Storage Temperature	-20°C to 65°C
Humidity	0 to 90% RH (non-condensing)
Vibration	9.80665 m/s² (1 G) less than 20 Hz; 5.88 m/s² (0.6 G) 20 to 50 Hz
IP Rating	IP20
Power System	TN system
Certifications	IEC/EN 61800-5-1, UL 508C